DBT Cloud (via Collector method) - v3.1.0

About Collectors

Pre-requisites

• Python 3.8 - 3.11

• Access to K landing directory

• Access to DBT Cloud

Unlike the other collectors, the DBT extractor produces manifest, catalog and run_result json files instead of csv files. Do not be alarmed if you see these.

This only works for DBT Cloud not DBT Core. If you are using DBT Core refer to this page

Step 1: Create the Source in K

Create an DBT Cloud source in K

• Go to Settings, Select Sources and click Add Source

• Select “Load from File system” option
  

  

• Give the source a Name - e.g. DBT Cloud Production

• Add the Host name for the DBT Cloud Server

• Click Finish Setup

Step 2: Getting Access to the Source Landing Directory

Step 3: Install the Collector

It is recommended to use a python environment such as pyenv or pipenv if you are not intending to install this package at the system level.

Some python packages also have dependencies on the OS level packages, so you may be required to install additional OS packages if the below fails to install.

You can download the Latest Core Library and whl via Platform Settings → Sources → Download Collectors

Run the following command to install the collector

pip install kada_collectors_extractors_<version>-none-any.whl

You will also need to install the common library kada_collectors_lib for this collector to function properly.

pip install kada_collectors_lib-<version>-none-any.whl

These are some known possible packages you may require depending on your OS, this is not exhaustive and only serves as a guide.

Step 4: Configure the Collector

The collector requires a set of parameters to connect to and extract metadata from DBT Cloud

{
    "60125": "af33141.australia-east.azure",
    "76e1e02270ddad585ed8ebf607230deeb779b3e5": "af33141.australia-east.azure"
}

These parameters can be added directly into the run or you can use pass the parameters in via a JSON file. The following is an example you can use that is included in the example run code below.

kada_dbt_extractor_config.json

{
    "account_id": "",
    "token": "",
    "output_path": "/tmp/output",
    "timeout": 20,
    "mapping": {},
    "dry_run": false,
    "compress": true,
    "environment_ids": [123,64]
}

Step 5: Run the Collector

The following code is an example of how to run the extractor. You may need to uplift this code to meet any code standards at your organisation.

This can be executed in any python environment where the whl has been installed. It will produce and read a high water mark file from the same directory as the execution called dbt_hwm.txt and produce files according to the configuration JSON.

This is the wrapper script: kada_dbt_extractor.py

import os
import argparse
from kada_collectors.extractors.utils import load_config, get_hwm, publish_hwm, get_generic_logger
from kada_collectors.extractors.dbt import Extractor

get_generic_logger('root') # Set to use the root logger, you can change the context accordingly or define your own logger

_type = 'dbt'
dirname = os.path.dirname(__file__)
filename = os.path.join(dirname, 'kada_{}_extractor_config.json'.format(_type))

parser = argparse.ArgumentParser(description='KADA DBT Extractor.')
parser.add_argument('--config', '-c', dest='config', default=filename, help='Location of the configuration json, default is the config json in the same directory as the script.')
parser.add_argument('--name', '-n', dest='name', default=_type, help='Name of the collector instance.')
args = parser.parse_args()

start_hwm, end_hwm = get_hwm(args.name)

ext = Extractor(**load_config(args.config))
ext.test_connection()
ext.run(**{"start_hwm": start_hwm, "end_hwm": end_hwm})

publish_hwm(_type, end_hwm)

Advance options:

If you wish to maintain your own high water mark files elsewhere you can use the above section’s script as a guide on how to call the extractor. The configuration file is simply the keyword arguments in JSON format. Refer to this document for more information Additional Notes | Storing-HWM-in-another-location

If you are handling external arguments of the runner yourself, you’ll need to consider additional items for the run method. Refer to this document for more information Additional Notes | The-run-method

class Extractor(token: str = None, account_id: str = None, environment_ids: list=[], \
mapping: dict = {}, timeout: int = 10, dry_run: bool = False, \
output_path: str = './output', compress: bool = False) -> None

token: DBT Cloud Read Only API Token.
account_id: account ID DBT Cloud, should be a numeric ID.
environment_ids: environment ID DBT Cloud, should be a numeric ID.
mapping: Dict of project ids to corresponding database hosts
timeout: Timeout for the API call
dry_run: Run the extractor for the purpose of producing
output_path: full or relative path to where the outputs should go
compress: To gzip output files or not

Step 6: Check the Collector Outputs

K Extracts

A set of files (eg metadata, databaselog, linkages, events etc) will be generated. These files will appear in the output_path directory you set in the configuration details

High Water Mark File

A high water mark file is created in the same directory as the execution called dbt_hwm.txt and produce files according to the configuration JSON. This file is only produced if you call the publish_hwm method.

If you want prefer file managed hwm, you can edit the location of the hwn by following these instructions Additional Notes | Storing-High-Water-Marks-(HWM)

Step 7: Push the Extracts to K

Once the files have been validated, you can push the files to the K landing directory.

You can use Azure Storage Explorer if you want to initially do this manually. You can push the files using python as well (see Airflow example below)

Example: Using Airflow to orchestrate the Extract and Push to K

# built-in
import os

# Installed
from airflow.operators.python_operator import PythonOperator
from airflow.models.dag import DAG
from airflow.operators.dummy import DummyOperator
from airflow.utils.dates import days_ago
from airflow.utils.task_group import TaskGroup

from plugins.utils.azure_blob_storage import AzureBlobStorage

from kada_collectors.extractors.utils import load_config, get_hwm, publish_hwm, get_generic_logger
from kada_collectors.extractors.tableau import Extractor

# To be configed by the customer.
# Note variables may change if using a different object store.
KADA_SAS_TOKEN = os.getenv("KADA_SAS_TOKEN")
KADA_CONTAINER = ""
KADA_STORAGE_ACCOUNT = ""
KADA_LANDING_PATH = "lz/tableau/landing"
KADA_EXTRACTOR_CONFIG = {
    "server_address": "http://tabserver",
    "username": "user",
    "password": "password",
    "sites": [],
    "db_host": "tabserver",
    "db_username": "repo_user",
    "db_password": "repo_password",
    "db_port": 8060,
    "db_name": "workgroup",
    "meta_only": False,
    "retries": 5,
    "dry_run": False,
    "output_path": "/set/to/output/path",
    "mask": True,
    "mapping": {}
}

# To be implemented by the customer. 
# Upload to your landing zone storage.
# Change '.csv' to '.csv.gz' if you set compress = true in the config
def upload():
  output = KADA_EXTRACTOR_CONFIG['output_path']
  for filename in os.listdir(output):
      if filename.endswith('.csv'):
        file_to_upload_path = os.path.join(output, filename)

        AzureBlobStorage.upload_file_sas_token(
            client=KADA_SAS_TOKEN,
            storage_account=KADA_STORAGE_ACCOUNT,
            container=KADA_CONTAINER, 
            blob=f'{KADA_LANDING_PATH}/{filename}', 
            local_path=file_to_upload_path
        )

with DAG(dag_id="taskgroup_example", start_date=days_ago(1)) as dag:
  
    # To be implemented by the customer.
    # Retrieve the timestamp from the prior run
    start_hwm = 'YYYY-MM-DD HH:mm:SS'
    end_hwm = 'YYYY-MM-DD HH:mm:SS' # timestamp now
    
    ext = Extractor(**KADA_EXTRACTOR_CONFIG)
    
    start = DummyOperator(task_id="start")

    with TaskGroup("taskgroup_1", tooltip="extract tableau and upload") as extract_upload:
        task_1 = PythonOperator(
            task_id="extract_tableau",
            python_callable=ext.run, 
            op_kwargs={"start_hwm": start_hwm, "end_hwm": end_hwm},
            provide_context=True,
        )
        
        task_2 = PythonOperator(
            task_id="upload_extracts",
            python_callable=upload, 
            op_kwargs={},
            provide_context=True,
        )

        # To be implemented by the customer. 
        # Timestamp needs to be saved for next run
        task_3 = DummyOperator(task_id='save_hwm') 

    end = DummyOperator(task_id='end')

    start >> extract_upload >> end